T512 oilmaster®
ratio oil pump -air operated

T512 OILMASTER®
T512Z zinc version OILMASTER®

Transfer oils up to 50 meters (165 ft) with this 5:1 ratio pump. Designed for inclusion in a workshop or mobile bulk oil system and can be used with Macnaught’s range of oil control guns and hose reels.

Features

quiet, non-corroding air motor
low air consumption
2” (M) bung adaptor
no air line lubricator required
built-in pressure relief valve
fully serviceable
10 year warranty and parts guarantee

Specifications

compatible fluids: oils up to SAE 140, automatic transmission fluid, engine oil, gear oil and hydraulic oils
wetted components: aluminium, zinc and hard chrome plated carbon steel, brass, nitrile and polyurethane rubber
pump ratio: 5:1 (oil pressure is 5 times the air pressure)
output: 15 L/min (4 US gal/min) of SAE 10 oil at 690 kPa (100 psi) air pressure (free flow)
max. air pressure: 1 030 kPa (150 psi, 10.3 bar)
min. air pressure: 400 kPa (60 psi, 4 bar)
min. air compressor: 0.08 m³/min. (3 cfm)
air inlet: ¼” NPT (F)
pump inlet: 1” BSP or NPT (F) and 1” UNEF
pump outlet: ¾” BSP or NPT (F)

Accessories

TB25S or TB26S Telescopic Suction Tube
TD20 Wall Bracket
TA-7K Filter & Regulator Kit
TB-20K Oil Feeder Hose

Fluid	Free flow (per min) at pump outlet		Output (per min) through 9 m (30 ft) x 12.5 mm (½") hose, 10 m (33 ft) x 12.5 mm (½") hose reel and and oil control gun
	Litres	US Gal	Litres	US Gal
Oil SAE 10	15	4.0	6	1.6
Oil SAE 30	13	3.4	5	1.4
Oil SAE 90	11	2.9	3.5	0.93

* Flow rates are a guide only and any variations can depend on system setup
* Flow rates at 690 kPa (100 psi) air pressure

T512 oilmaster® ratio oil pump -air operated

T512 oilmaster®
ratio oil pump -air operated