T112 oilmaster®
ratio oil pump -air operated

T112S-01 OILMASTER® Stub pump
T112T-01 OILMASTER® Drum pump (suits 205L drum)

Transfer oils up to 10 metres (33 ft) with this 1:1 ratio pump. Designed for inclusion in a workshop or mobile bulk oil transfer system and can be used with Macnaught’s range of oil control guns

Features

quiet, non-corroding air motor
low air consumption
2” (M) bung adaptor
no air line lubricator required
fully serviceable
10 year warranty and parts guarantee

Specifications

compatible fluids: oils up to SAE 140, automatic transmission fluid, engine oil, gear oil and hydraulic oils
wetted components: aluminium, zinc and hard chrome plated carbon steel, brass, nitrile and polyurethane rubber
pump ratio: 1:1 (oil pressure is the same as air pressure)
output: 27 L/min (7 US gal/min) of SAE 10 oil at 690 kPa (100 psi) air pressure (free flow)
max. air pressure: 1 030 kPa (150 psi, 10.3 bar)
min. air pressure: 400 kPa (60 psi, 4 bar)
min. air compressor: 0.3 m³/min, (10 cfm)
air inlet: ¼” NPT (F)
pump inlet: 1” BSP or NPT (F) and 1” UNEF
pump outlet: ¾” BSP or NPT (F)

Accessories

TD20 Wall Bracket
TA-4K Pressure Regulator Kit

Fluid	Free flow (per min.) at outlet		Output (per min.) through 3 m (10 ft) x 19 mm (¾") hose, and hose end oil delivery gun
	Litres	US Gal	Litres	US Gal
Oil SAE 10	27	7.1	10	2.6
Oil SAE 30	23	6.1	8.5	2.2
Oil SAE 90	22	5.8	7	1.8
flow rates are a guide only and any variations can depend on system setup flow rates at 690 kPa (100 psi) air pressure

T112 oilmaster® ratio oil pump -air operated

T112 oilmaster®
ratio oil pump -air operated