M05 - 1/8" pulse meters

The M05 is a small capacity meter in the M-SERIES™ range and is differentiated by its flow rate capabilities. It has the ability to handle a wide range of fluid viscosities with exceptional levels of repeatability and durability.

Features

Very compact size.
Low flow capability with high resolution output.
Meter accuracy is verified by a factory calibration check after which an individual metrology report is issued.
Solid state Hall Effect Sensor/Reed Combination.
Low pressure drop allows for economical pump selection or gravity flow applications.
Meter design minimises the number of wearable and replaceable parts and extends product life.
Has IP54/NEMA13 protection.
Flexibility of installation options (e.g. can be mounted horizontally or vertically; no flow conditioning required).

Specification:

Model	M05SSP-X	M05ASP-X
Meter Type	Pulse	Pulse
Meter Body Material	316 Stainless Steel	Aluminium / PPS
Wetted Components: Rotor Material Shafts O'ring	316 Stainless Steel / Ceramic 316 Stainless Steel FKM	316 Stainless Steel / Ceramic 316 Stainless Steel FKM
Flow Rate Ranges (Litres Per Hour/US Gallons Per Hour) Above 5 cPs Below 5 cPs	0.5 To 50 / 0.13 To 13.2 2 To 50 / 0.53 To 13.2 (Excluding Water)	0.5 To 50 / 0.13 To 13.2 2 To 50 / 0.53 To 13.2
Accuracy- Within (Of Reading)	±1%	±1%
Repeatability	0.03%	0.03%
Maximum Viscosity	1000 Centipoise	1000 Centipoise
Maximum Operating Pressure	1000kpa/ 150psi/ 10bar “I” 5500kpa/ 800psi/ 55bar	500kpa/ 75psi/ 5bar
Pulser Type	Dual Hall Effect Sensor/Reed Switch	Dual Hall Effect Sensor/Reed Switch
Pulses Per Litre/Us Gallon	1547 / 5855.4	1547 / 5855.4
Model Dimensions Meter Body Port Face To Face	50x50mm / 1.97”X1.97” 67mm / 2.64”	50x50mm / 1.97”X1.97” 60mm / 2.36”
Weight	600g / 21.2oz	310g / 11oz
Max. Operating Temperature	120°C / 248°F	80°C / 176°F
Recommended Mesh Strainer	200 Mesh	200 Mesh

X = Port SizeTo order flowmeter you must replace ‘X’ with the relevant number. Meter mounted options = MR100 LCD and or MR150LA (4-20mA - module) or combination of both.

Port Size

Port Size:	Calibrated In:	Electrical Connection:
1 = 1/8” BSP (F) ports	Litres	1m/39” pulser fly lead (5 core cable)
2 = 1/8” NPT (F) ports	US gallons	1m/39” pulser fly lead (5 core cable)

PPS = Polyphenylene Sulfide Resins
Note: Water usage is limited due to poor lubricating quality of the fluid limiting accuracy and bottom end stable operation.

Options and accessories

M05 - 1/8” Pulse Meters	M05SSP-X	M05ASP-X
FKM O-Ring	•	•
FFPM Elastomer	Ο	Ο
EPDM O-Ring	Ο	Ο
High Temp Rotors	-	-
High Viscosity Rotors	-	-
Hall Effect Sensor	•	•
Reed Switch	•	•
Solvent Kit	-	-
PPS Rotors With Hastalloy C Shafts	-	-
Remote Mounted LC Display	+	+
4-20ma Module (Remote)	+	+
Meter Mounted LC Display	+	+
Meter Mounted 4-20mA Module	+	+

• Standard Ο Optional - Not Available + Accessory