greasing couplers
| Download Brochure |
|
| Go To: ZSB | KZSNR | KZLNS | KZLNR | KZLNJ | KZLN45 | KZHY | KN | KZX | KZE | KZDXL | KRV | KGR | KSR | KDS | KDR | KDN | KY | |
|
ZSB swivel A 360° swivel supplied either separately or with the B2 Booster Gun. Threads 1/8” NPT (M) x ¼” NPT (F). |
 |
|
|
|
|
KZSNR 90° needlepoint coupler An 110 mm (4 ¼”) needlepoint coupler with a 90° bend at the end. |
|
|
|
|
|
KZLNS needlepoint coupler Push on needlepoint grease extension, ideal for use with four wheel drive vehicles. Length 300 mm (12”) |
|
|
|
|
|
KZLNR needlepoint coupler Push on needlepoint extension with 90° angle at the end. Ideal for use with aircrafts. Length 300 mm (12”). |
|
|
|
|
|
KZLNJ needlepoint coupler Push on needlepoint extension with j bend at the end. Ideal for use with aircrafts. Length 300 mm (12”) |
 |
|
|
|
|
KZLN45 needlepoint coupler Push on needle point grease extension with 45° angle at the end. Ideal for use with aircrafts. Length 300 mm (12”) |
|
|
|
|
|
KZHY hyperdermic needlepoint coupler Ideal for use on bearings fitted with rubber dust covers. Length 130 mm (5 1/8”). |
 |
|
|
|
|
KIN grease injector needle Small needle used to inject sealed bearings and small lubrication points with grease when no grease nipples are present. Length 64 mm (2 ½”). |
 |
|
|
|
|
KZX concave nipple coupler A similar coupler to the KZE but fitted with a rigid extension. Length 200 mm (8”). |
 |
|
|
|
|
KZE concave nipple coupler Used when vehicles are fitted with special nipples or, in some cases, when normal nipples are damaged. Length 60 mm (2 ¼”). |
 |
|
|
|
|
KZDXL straight needlepoint coupler Ideal for greasing the bearings on four wheel drive vehicles. Length 120 mm (4 ¾”). |
 |
|
|
|
|
KZD needlenose coupler Used when nipples are recessed and standard couplers would meet with interference from surrounding components (universal joints, etc). Length 93 mm (3 ¾”). |
 |
|
|
|
|
KRV pressure release valve Helps to prevent nipples from breaking off and couplers from splitting. Recommended for use with the K7 MINILUBE®, P3 POWERLUBE®, and P6 and P8 MAXILUBE®. |
 |
|
|
|
|
KGR giant buttonhead coupler For use on plant and machinery fitted with 7/8” buttonhead nipples. Length 85 mm (3 3/8”). |
 |
|
|
|
|
KSR standard buttonhead coupler For use on plant and machinery fitted with 5/8” buttonhead nipples. Length 72 mm (2 ¾”). |
 |
|
|
|
|
KDS right angle coupler A slightly shorter version of the KDR. Along with the KDN and KDR, it can be used with a flexible extension. |
 |
|
|
|
|
KDR right angle coupler For use in spaces when the area above the nipple is limited. |
|
|
|
|
|
KDN right angle needlepoint coupler Ideal where access to the grease nipple is minimal. |
 |
|
|
|
|
KY SUPERGRIP™ hydraulic grease coupler Standard SUPERGRIP coupler supplied with all Macnaught grease guns. Designed to fit most grease nipples and grease guns. Can be purchased separately or in packets of 8 (KY-8). Threads 1/8” BSP |
 |
